Adapter
adapters
Air Guard
BALL VALVE
blower
Bracket
Cable
catridge
Clamp
cleaning
clevis
CLIP
Connector
control regulators
Control Valve
coupler
Crimping Machine
Cylinder
Elbow
Ferrule
Filters
Filtration
Fitting
Fittings
Flange
Fluid Connector
foot
foots Bracket
Hand Grip
Hose
hose Cutter
Hose Fitting
Hose Real
Indicator
Locking washer
Locknut
Moduflex
Needle Valve
Nuts
O Lock
O Ring
O-Ring
oil monitor
Plug
Pneumatic
Pneumatic Valve
pneumatics
Power Cleaner Connection
Rail nut
Recoil
Reducer
Regulator
Ring
Rings
Safety Valve
screw
Seal
Senso control
sensor
Solenoid Coil
Solenoid valve
Switch
Transair
Tube
tube fittings
Tubes
Union
Union Tee
Valve
Water Sensor
Weld nipple
Offshore dimensions Parker Store
Offshore Dimensions ParkerStore
Offshore Dimensions-Parker Store
Parker Hannifin
Parker Store Nigeria
Brazed Plate Water Oil Cooler - PWO Series(AP) 50831007
$1,451.42
The Parker PWO is a compact and lightweight Water Oil Cooler (also known as a brazed plate heat exchanger) with a high cooling capacity for its size. Please use the PWO Sizing Software on the Product Support Tab for proper cooler sizing.
The cooling elements of the Parker PWO water oil cooler consist of corrugated channel plates sandwiched between the front and rear cover plates. The channel plates are pressed and vacuum brazed in the same automated procedure, with rigorous standards of quality control. The design of the Parker PWO emphasizes a number of possibilities for versatile and efficient solutions.Markets:• Industrial• Marine• MobileFeatures/Benefits:• Light and compact• Suitable for many applications• Easy installation• Cost-efficient and environmentally friendlyThe correct working temperature produces a number of economic and environmental benefits:• The hydraulic system’s useful life is extended.• The oil’s useful life is extended.• The hydraulic system’s availability increases – more operating time and fewer shutdowns.• Service and repair costs are reduced• High efficiency level maintained in continuous operation – the system’s efficiency falls if the temperature exceeds the ideal working temperature.Applications:• Marine cranes• Crushing machines• Mining equipment• Power units• Lubrication systems• Presses• Wind power
Parker Filter Element - 937399Q
$181.54
Parker Filter Element - 937399Q Replacement Hydraulic Filter Element 10 Microns - LOW PRESSURE FILTER MODUFLOW™ PLUS SERIES. The patented Parker Moduflow™ Plus Series Low Pressure In-Line Suction/Return/Duplex Filter element features longer element life, increased dirt-holding capacity and requires fewer element changes, reducing system maintenance costs. Parker Filter Element - 937399Q
Item Hydraulic:
Filter Element
Microns: 10
Filter Media: Microglass
Max. Flow GPM: 10
Operating Pressure (PSI): 200
Filter housing series : RFP/ILP/DILP/TFP
Fatigue Rating (PSI): 150
Housing Type: Double
Filters: Contaminants
Seal: Nitrile
For Use With: Mfr. No. 10MFP240SA10QB16151
Weight(kg): 1.3
Quantity: 5
Parker Four Steel Wire Spiral Wound Hydraulic Hose - 731-12
$67.90
Parker Four Steel Wire Spiral Wound Hydraulic Hose - 731-12
Parker Four Steel Wire Spiral Wound Hydraulic Hose -731-12 has been designed for a working pressure up to 42.0 MPa and a temp. range from -40 °C up to +100 °C. The Series is suitable for general high-pressure hydraulic applications.
Parker Four Steel Wire Spiral Wound Hydraulic Hose - 731-12 is available at Parker Store Nigeria
Brand Name
Parker
UNSPSC
40142020
Item
Hydraulic Hose
Type
Standard Cover
Series
731
Inside Diameter
3/4 in
Outside Diameter
32 mm
Minimum Bend Radius
11 in
Working Pressure
6000 psi
Working Temperature
-40 to 100 deg C
Material
Synthetic Rubber
Color
Black Cover
Industry Standards
SAE J1942/ISO 3862-1 Type 4SH/EN 856 Type 4SH/USCG HF/DNV/ABS
Reinforcement
4 Spiral Wound High Tensile Steel Wire
Compatible Fittings
Parker 73 Series
Application
Mobile and Industrial
Part Number
731-12
Parker Four Steel Wire Spiral Wound Hydraulic Hose 731-16
$83.12
Parker Four Steel Wire Spiral Wound Hydraulic Hose 731-16
Parker Four Steel Wire Spiral Wound Hydraulic Hose 731-16 according to ISO 3862-EN 856 type has been designed for a working pressure up to 42.0MPa and a temp. range from
-40 °C up to +100 °C the series is suitable for general high-pressure hydraulics pressure.
Parker Four Steel Wire Spiral Wound Hydraulic Hose 731-16 is available in Parker Store Nigeria
Brand Name
Parker
UNSPSC
40142020
Item
Hydraulic Hose
Type
Standard Cover
Series
731
Inside Diameter
3/4 in
Outside Diameter
32 mm
Minimum Bend Radius
11 in
Working Pressure
6000 psi
Working Temperature
-40 to 100 deg C
Material
Synthetic Rubber
Color
Black Cover
Industry Standards
SAE J1942/ISO 3862-1 Type 4SH/EN 856 Type 4SH/USCG HF/DNV/ABS
Reinforcement
4 Spiral Wound High Tensile Steel Wire
Compatible Fittings
Parker 73 Series
Application
Mobile and Industrial
Part Number
731-16
Parker General Purpose Hydraulic Hose 540N-3 to -8 Series
$32.03
Parker’s 540N Hydraulic Hose has excellent chemical compatibility and is available as a twinline hose.
TECHNICAL CHARACTERISTICS
Hose I.D. (mm)
8
Maximum Working Pressure (psi)
2,500
Maximum Working Pressure (Mpa)
17.2
Compatible Fittings
56 Series
Minimum Working Temperature (F)
-40
Minimum Working Temperature (C)
-40
Maximum Working Temperature (F)
212
Maximum Working Temperature (C)
100
Minimum Bend Radius (inch)
1.75
Minimum Bend Radius (mm)
44
Industry Standards
SAE 100R7, MSHA accepted
Media
Air, Chemicals, Hydraulic Fluid, Oil, Water
PART NUMBER
QUANTITY
PRICE
540N-3
4
12.46
540N-4
10
13.63
540N-5
3
15.93
540N-6
10
17.86
540N-8
10
21.26
Parker High Pressure Hydraulic Hose - 701-6
$49.14
Parker High Pressure Hydraulic Hose - 701-6 is the preferred hoses for general high-pressure hydraulic applications. The hoses are designed with a No-Skive construction and are suitable for a working pressure up to 45,0 MPa. Based on the advanced materials the hose type 701-6 is highly abrasion-resistant. Parker High Pressure Hydraulic Hose - 701-6 range is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel.
Parker High Pressure Hydraulic Hose - 701-6 is available on Parker Store Nigeria.
Material: Rubber
Working Pressure: 5000 PSI (340 bar)
Inner Diameter: 0.625 Inch
Series: 701
Hose Pressure Range: High
Inch/Metric: Inch
Working Pressure Range: > 5000 PSI (345 bar)
Application: Hydraulic
Inner Diameter Inch/mm: Inch
Parker Group: Fluid Connector
Parker Division: Hose Products
Specification: ISO 3862-1 TYPE 4SP / EN 856 TYPE 4SP
Application: Hydraulic
Specific Application: Petroleum base hydraulic fluids and lubricating oils
Part Number: 701-6
Parker High Pressure Hydraulic Hose - 701-8
$49.99
Parker High Pressure Hydraulic Hose - 701-8 is the preferred hoses for general high-pressure hydraulic applications. The hoses are designed with a No-Skive construction and are suitable for a working pressure up to 45,0 MPa. Based on the advanced materials the hose type 701-8 is highly abrasion-resistant Parker High Pressure Hydraulic Hose - 701-8. is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel.
Material: Rubber
Working Pressure: 5000 PSI (340 bar)
Inner Diameter: 0.625 Inch
Series: 701
Hose Pressure Range: High
Inch/Metric: Inch
Working Pressure Range: > 5000 PSI (345 bar)
Application: Hydraulic
Inner Diameter Inch/mm: Inch
Parker Group: Fluid Connector
Parker Division: Hose Products
Specification: ISO 3862-1 TYPE 4SP / EN 856 TYPE 4SP
Application: Hydraulic
Specific Application: Petroleum base hydraulic fluids and lubricating oils
Part Number: 701-8
Parker High Pressure Hydraulic Hose - 701-8
Parker High Pressure Hydraulic Hose - 70110 SERIES
$67.90
Parker High Pressure Hydraulic Hose - 70110 SERIES
Parker High Pressure Hydraulic Hose - 70110 SERIES is the preferred hoses for general high-pressure hydraulic applications. The hoses are designed with a No-Skive construction and are suitable for a working pressure up to 45,0 MPa. Based on the advanced materials the hose type 70110 is highly abrasion-resistant. The Parker High Pressure hose range is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel.
Parker High Pressure Hydraulic Hose - 70110 SERIES is available at Parker Store Nigeria
Material: Rubber
Working Pressure: 5000 PSI (340 bar)
Inner Diameter: 0.625 Inch
Series: 701
Hose Pressure Range: High
Inch/Metric: Inch
Working Pressure Range: > 5000 PSI (345 bar)
Application: Hydraulic
Inner Diameter Inch/mm: Inch
Parker Group: Fluid Connector
Parker Division: Hose Products
Specification: ISO 3862-1 TYPE 4SP / EN 856 TYPE 4SP
Application: Hydraulic
Specific Application: Petroleum base hydraulic fluids and lubricating oils
Part Number
Quantity
Price
70110
40
57.38
70112
40
66.99
70116
40
82.01
70120
40
123.07
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Parker Hydraulic Hose 520N Series
$11.21
$35.00
Application
Fluid Handling, Hydraulic, Manufacturing / Industrial, Construction, Food & Beverage, Pneumatics, Agriculture / Forestry
Hose I.D. (inch)
3/16, 1/4, 5/16, 3/8, 1/2
Hose I.D. (mm)
5, 6, 8, 10, 13
Industry Standards
SAE 100R8, SAE J517 for less than 50 micro-amps leakage under 75,000 volts per foot, MSHA
Maximum Working Pressure (Mpa)
24.1 - 34.5
Maximum Working Pressure (psi)
3,500 - 5,000
Media
Hydraulic Fluids, Lubricants, Air, Water
Minimum Bend Radius (inch)
1-1/2 - 4
Hose I.D. (size)
-3, -4, -5, -6, -8
Hose O.D. (inch)
0.43 - 0.81
Hose O.D. (mm)
11 - 21
Maximum Working Pressure (bar)
190 - 345
Minimum Bend Radius (mm)
38 - 102
Vacuum Rating (inch of Hg)
28
Vacuum Rating (mm of Hg)
711.2
Weight (kg/m)
0.07 - 0.20
Weight (lbs/ft)
0.05 - 0.14
Color
Black, Orange
Hose Type
General Purpose, Non Conductive
Compatible Fittings
56 Series
Minimum Working Temperature (F)
-40
Minimum Working Temperature (C)
-40
Maximum Working Temperature (F)
212
Maximum Working Temperature (C)
100
PART NUMBER
QUANTITY
PRICE
520N3
10
$11.21
520N4
10
$12.45
520N5
6
$14.42
520N6
10
$16.52
520N8
1
$20.11
Parker Hydraulic Hose- 731-20
$124.76
Parker Hydraulic Hose- 731-20 according to ISO 3862 -EN 856 Type 4SH has been designed for a working pressure up to 42.0 MPa and a temp. range from -40 °C up to +100 °C.The series is suitable for general high-pressure hydraulic applications. Parker Hydraulic Hose- 731-20 is available in Parker Store Nigeria. Parker Hydraulic Hose- 731-20
Brand Name
Parker
UNSPSC
40142020
Item
Hydraulic Hose
Type
Standard Cover
Series
731
Inside Diameter
3/4 in
Outside Diameter
32 mm
Minimum Bend Radius
11 in
Working Pressure
6000 psi
Working Temperature
-40 to 100 deg C
Material
Synthetic Rubber
Color
Black Cover
Industry Standards
SAE J1942/ISO 3862-1 Type 4SH/EN 856 Type 4SH/USCG HF/DNV/ABS
Reinforcement
4 Spiral Wound High Tensile Steel Wire
Compatible Fittings
Parker 73 Series
Application
Mobile and Industrial
Part Number
731-20
Parker Hydraulic No- Skive Hose 301SN-20
$37.26
Burst Pressure min.:
500 bar
Working pressure max. bar:
125 bar
Working pressure max. PSI:
1800 PSI
Bend Radius min.:
420 mm
DN:
32 mm
Outer diameter:
47,5 mm
Inner diameter 1:
31,8 mm
Colour:
black
Weight:
1,73 kg
Norm:
EN853/2SN
Series:
301SN
Temp. max.:
100 °C
Temp. min.:
-40 °C
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Parker No Skive Hydraulic Hose - 462-4-RL,
$11.66
$12.34
Part numbers: 462-4-RL,
Burst Pressure min.:
1120 bar (16000 PSI)
Working pressure max. bar:
280 bar
Working pressure max. PSI:
4000 PSI
Bend Radius min.:
195 mm
DN:
20 mm
Outer diameter:
27,7 mm
Inner diameter 1:
19,1 mm
Weight:
0,86 kg
Norm:
EN857/2SC SAE100R18
Series:
462
Temp. max.:
100 °C
Temp. min.:
-40 °C
Wall thickness:
3,5 mm
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Parker No Skive Hydraulic Hose - 462-8-RL,
$14.93
$62.90
Part numbers: , 462-8-RL,
Burst Pressure min.:
1120 bar (16000 PSI)
Working pressure max. bar:
280 bar
Working pressure max. PSI:
4000 PSI
Bend Radius min.:
195 mm
DN:
20 mm
Outer diameter:
27,7 mm
Inner diameter 1:
19,1 mm
Weight:
0,86 kg
Norm:
EN857/2SC SAE100R18
Series:
462
Temp. max.:
100 °C
Temp. min.:
-40 °C
Wall thickness:
3,5 mm
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Parker Non Skive Hydraulic Hoses 462-6-RL
$52.42
$54.61
Part numbers: 462-6-RL,
Burst Pressure min.:
1120 bar (16000 PSI)
Working pressure max. bar:
280 bar
Working pressure max. PSI:
4000 PSI
Bend Radius min.:
195 mm
DN:
20 mm
Outer diameter:
27,7 mm
Inner diameter 1:
19,1 mm
Weight:
0,86 kg
Norm:
EN857/2SC SAE100R18
Series:
462
Temp. max.:
100 °C
Temp. min.:
-40 °C
Wall thickness:
3,5 mm
00
DAYS 00
HRS 00
MIN 00
SEC
DAYS 00
HRS 00
MIN 00
SEC
Parker Non Skive Hydraulic Hoses - 462-16-RL
$30.96
$34.11
Part numbers: , , 462-16-RL
Burst Pressure min.:
1120 bar (16000 PSI)
Working pressure max. bar:
280 bar
Working pressure max. PSI:
4000 PSI
Bend Radius min.:
195 mm
DN:
20 mm
Outer diameter:
27,7 mm
Inner diameter 1:
19,1 mm
Weight:
0,86 kg
Norm:
EN857/2SC SAE100R18
Series:
462
Temp. max.:
100 °C
Temp. min.:
-40 °C
Wall thickness:
3,5 mm